| The NAC122x, a replacement
for the NAC112x, is based on its larger brother the NAC202 and
features a hardwired motorised Alps volume control potentiometer
delivering better performance, lower noise in use and an improved
feel over the resistor ladder volume control of the NAC112x.
The six DIN inputs are relay switched, contrasting
with being multiplexed on the NAC112x, improving performance.
Inputs one and six: (CD and Aux2) are duplicated on RCA sockets.
Much care in the design has been afforded to making
the casework and PCB as low resonance as possible and to isolate
the PCB from the environment and hence deleterious vibrations.
The NAC122x features an additional output in addition
to the Naim standard DIN. This stereo output on two RCA sockets,
is optimised for connection to an active subwoofer, supports the
growing use of 2.1 systems.
Rear panel layout is similar to the NAC202 and hence
is Fraim friendly.
The NAC122x can be powered from the preamp power
outputs of the NAP150x or NAP200 or can be upgraded by powering
it from either a FlatCap 2x or Hi-Cap 2 power supply. One of the
DIN inputs can supply power to a Naim Stageline outboard phono
stage.
|
